Results 1 to 8 of 8

Thread: Bersa BP9cc trigger weight

  1. #1
    Junior Member
    Join Date
    Mar 2012
    Location
    Evergreen, CO
    Posts
    1

    Bersa BP9cc trigger weight

    I purchased a BP9cc about a month ago. I haven't put too many rounds through it, about 200 or so, but so far it has functioned fine.

    The trigger pull on it is VERY light. Way too light for a carry pistol IMO.

    Is there any way to make the trigger pull a little heavier?

    I know that is an unusual question, but this pistol has the lightest trigger on any pistol I have ever owned and I imagine it is only going to get lighter as the pistol is shot more.
    Last edited by High Altitude; 03-18-2012 at 11:38 PM.

  2. #2
    Senior Member
    Join Date
    Apr 2010
    Posts
    770
    The light trigger seems to be normal for those pistols. Despite this, several carry it & just make sure their holster is built to cover it & when they draw it, keep the trigger finger along the side of the frame until on target & ready to shoot. I don't know if there is a way to raise it. You might call a warranty center & ask them.

    If you like, join us at Bersa Chat & visit with other owners & get their thoughts on it.

    http://www.bersachat.com/forums/forum.php

  3. #3
    Administrator
    Join Date
    Apr 2010
    Location
    Lyons, Indiana
    Posts
    290
    There are ways to raise the trigger pull weight, but I believe I would try and get used to the factory setting. If it truly does feel TOO light, there may be an issue. Please let us know and we can check it under the warranty for the firearm. Please let us know how we can be of help best.
    Thanks,
    C. Royce Honeycutt
    Master Gunsmith
    Bersa Warranty Center
    Bersa Custom Work

  4. #4
    Quote Originally Posted by ColoradoGunWorksGunsmith View Post
    There are ways to raise the trigger pull weight, but I believe I would try and get used to the factory setting. If it truly does feel TOO light, there may be an issue. Please let us know and we can check it under the warranty for the firearm. Please let us know how we can be of help best.
    Thanks,
    Would it be possible for you to post the estimated trigger weight range for the BP9, please?

  5. #5
    Administrator
    Join Date
    Apr 2010
    Location
    Lyons, Indiana
    Posts
    290
    Sure AG, I'll do it in a couple of days after completing this weeks work.
    Always happy to help.
    Thanks,
    C. Royce Honeycutt
    Master Gunsmith
    Bersa Warranty Center
    Bersa Custom Work

  6. #6
    Quote Originally Posted by ColoradoGunWorksGunsmith View Post
    Sure AG, I'll do it in a couple of days after completing this weeks work.
    Always happy to help.
    Thanks,
    Thank you, Sir.....

  7. #7
    Administrator
    Join Date
    Apr 2010
    Location
    Columbia, SC
    Posts
    128
    from what i understand, the trigger weight on the BP is around 4 - 4.5lbs.

  8. #8
    Administrator
    Join Date
    Apr 2010
    Location
    Lyons, Indiana
    Posts
    290
    Ok, after testing the results from three BP Pistols, the average trigger pull is 3 1/2 pounds. 10 pulls each and then an average that was just slight over 3 and 1/2 pounds. There you have it.
    Thanks,
    C. Royce Honeycutt
    Master Gunsmith
    Bersa Warranty Center
    Bersa Custom Work

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •