Search:

I am referring to the Magazine follower as the Slide Catch Lever does not have a follower. Magazine springs have more than one type of tension that should be checked from time to time. Also, to...

There is another possibility, check to see if the slide is developing any burrs on the slide rails. If so, I would recommend having it checked and repaired at a warranty center. Please let us know...

Firing the action in DA does not stretch any spring in the Bersa small frame firearms. It compresses the hammer spring, compresses the trigger return spring, and does nothing to the disconnector...

A little wiggle is normal in the ejector of the Bersa Firearms. As they break in this wiggle will devolop, but it should not reach a point of interfearing with the slides operation. If that should...

No, it is possible that the stamping was partially filled when the finish was applied. I have checked a sampling of our pistols and they all seem good. But, thank you for the feedback, and I will...

The slide releasing while removing the magazine is a sign that the slide catch lever and/or the magazine follower need to be replaced. It is possible that the cut out in the slide has an issue, that...

It could be a number of things, but with use it should get somewhat better as parts mate surfaces and springs take a set. Please let us know what you decide to do.
Thanks,

We do not recommend the Winchester White Box in .380acp, as we have seen a QA problem with this ammunition involving "squib" rounds. We have notified Winchester, and they have never taken notice of...

We'd be happy to help. As for sending it to us, it is fairly simple.

Please write us a letter explaining the concern with the firearm. Include in your letter a physical address for us to ship it...

First, I would ask what type of sight picture hold are you using? The Bersa pistols come from the factory with a "dead on" type of sight hold. This means that the front dot should be on the point of...

So true, wait a minute, that helps me..... GO DREMEL! LOL!

Jeff, you can send it in under the warranty and have it repaired, and not run the risk of an improper repair by a non authorized person that will void the warranty. Please let us know how we can...

I'm sorry to say it, but I believe this will take a warranty service center. If it is a parts issue, we can replace them under the warranty. If it is a frame issue, we can replace the firearm if...

Yes, that would be covered under your warranty. Please let us know if you need anything, or help to get it repaired.
Thanks,

There are a couple of things I can think of that could be the culprit, but they are not consumer friendly services to perform. If you would like, we would be happy to go through the firearm and...

I don't know what the chat' has to say, but I can give you some thoughts from our experience.

Duracoat is a kind of "paint". When it is applied, the surfaces need to be properly prepared in order...

If not, please contact us and we would be happy to help.
Thanks,

Let us know what the issue is and we would be happy to help you figure it out.
Thanks,

The only sure cure for the trigger issue is to send it in and have it repaired. Pleacing the spring back in place will be a temp fix. Please let us know how we can help.
Thanks,

Good to hear it works now. Please let us know what we can do to help should you need it.
Thanks,

Have fun with it and let us know if we can be of help.
Thanks,

Any time AG, if anyone is ever out of stock, check with us because we usually have most items in stock.
Thanks,

I addressed this in another thread, but it could be your magazine or ammunition. If it continues, please let us know and we can get it serviced under the warranty. Let us know how we can help....

The slide passing over the next round could be a magazine or ammunition problem. If after a good cleaning and lube it continues, please let us know. We recommend high velocity ammunition like the CCI...

If it gets sent to the office it would not get lost.

As for repairs, your FFL can send it the least expensive. Include a letter explaining the issue, make sure they give us a copy of their FFL....